Physiological and genetic regulation of anhydrobiosis in yeast cells.

Anhydrobiosis is a state of living organisms during which their metabolism is reversibly delayed or suspended due to a high degree of dehydration. Yeast cells, which are widely used in the food industry, may be induced into this state. The degree of viability of yeast cells undergoing the drying process also depends on rehydration. In an attempt to explain the essence of the state of anhydrobiosis and clarify the mechanisms responsible for its course, scientists have described various cellular compounds and structures that are responsible for it. The structures discussed in this work include the cell wall and plasma membrane, vacuoles, mitochondria, and lysosomes, among others, while the most important compounds include trehalose, glycogen, glutathione, and lipid droplets. Various proteins (Stf2p; Sip18p; Hsp12p and Hsp70p) and genes (STF2; Nsip18; TRX2; TPS1 and TPS2) are also responsible for the process of anhydrobiosis. Each factor has a specific function and is irreplaceable, detailed information is presented in this overview.

Comparison of the Chemical Composition and Antioxidant Properties of Propolis from Urban Apiaries.

Bee products from urban apiaries are increasingly used. They are mainly used to promote local apiaries and cities in which they are located. The aim of the study was to compare the chemical composition and antioxidant activity of propolis from 6 Polish apiaries located in cities (Legionowo, Torun, Cracow, Warsaw, Katowice, Lodz). The chemical composition was analyzed using liquid chromatography (HPLC-DAD) and the analysis of antioxidant activity by scavenging free radicals (ABTS and DPPH) and FRAP. The obtained results showed the presence of 24 phenolic compounds in propolis extracts. The tested samples showed differentiation in terms of the content of individual chemical components, however, cinnamic acid and its derivatives were dominant. High antioxidant activity of the tested extracts was demonstrated (ABTS was in the range of 16.80-51.53 mg Te/mL, DPPH was in the range of 7.54-22.13 mg Te/mL, while FRAP reduction was in the range of 10.93-29.55 mg Te/mL). The obtained results compared with literature data on propolis from agricultural areas allow to conclude that propolis samples from both Poland types of areas are similar and can be classified as poplar propolis.

Recent advances and opportunities related to the use of bee products in food processing.

Nowadays, natural foods that can provide positive health effects are gaining more and more popularity. Bees and the products they produce are our common natural heritage that should be developed. In the article, we presented the characteristics of bee products and their use in industry. We described the development and importance of beekeeping in the modern world. Due to their high nutritional value and therapeutic properties, bee products are of great interest and their consumption is constantly growing. The basis for the use of bee products in human nutrition is their properties and unique chemical composition. The conducted research and opinions confirm the beneficial effect of bee products on health. The current consumer awareness of the positive impact of food having a pro-health effect on health and well-being affects the increase in interest and demand for this type of food among various social groups. Enriching the daily diet with bee products may support the functioning of the organism. New technologies have appeared on the market to improve the process of obtaining bee products. The use of bee products plays a large role in many industries; moreover, the consumption of bee products and promotion of their medicinal properties are very important in shaping proper eating habits.

Diversity of Red Yeasts in Various Regions and Environments of Poland and Biotechnological Potential of the Isolated Strains.

Due to the growing demand for natural carotenoids, researchers have been searching for strains that are capable of efficient synthesis of these compounds. This study tested 114 red yeast strains collected from various natural environments and food specimens in Poland. The strains were isolated by their ability to produce red or yellow pigments in rich nutrient media. According to potential industrial significance of the carotenoids, both their total production and share of individual carotenoids (ß-carotene, γ-carotene, torulene, and torularhodin) were analyzed. The total content of carotenoid pigments in the yeast dry matter ranged from 13.88 to 406.50 µg/g, and the percentages of individual carotenoids highly varied among the strains. Most of the yeast isolates synthesized torulene at the highest amount. Among the studied strains, isolates with a total carotenoid content in biomass greater than 200 µg/g and those containing more than 60% torularhodin were selected for identification (48 strains). The identified strains belonged to six genera: Rhodotorula, Sporidiobolus, Sporobolomyces, Buckleyzyma, Cystofilobasidium, and Erythrobasidium. The largest number of isolates belonged to Rhodotorula babjevae (18), Rhodotorula mucilaginosa (7), Sporidiobolus pararoseus (4), and Rhodotorula glutinis (4).

Magnesium Binding by Cyberlindnera jadinii Yeast in Media from Potato Wastewater and Glycerol.

The aim of this study was to determine the magnesium-binding capacity of Cyberlindnera jadinii yeast in media prepared from potato wastewater and glycerol (after biodiesel production), supplemented with magnesium salt. The research was carried out in two stages. In the first, the ability to binding magnesium by yeast in media supplemented with various doses of this element was tested. In the second stage, after selecting the appropriate dose of magnesium, the culture was carried out in a bioreactor. The composition of the yeast biomass was also analysed in terms of lipids and protein content and amino acid composition. Studies have shown that this type of medium can be used as a culture medium for the growth of C. jadinii yeast. In the first stage of the study, the most magnesium (8.97 mg/gd.m.) was bound by yeast cells after 48 h of cultivation in a medium supplemented with the addition of magnesium at a dose of 2 g/L. In the second stage of the research, the highest magnesium content in the biomass (7.9 mg/gd.m.) was noted after 24 h of cultivation in the same medium. The lipid and protein contents in the biomass obtained after 24 h of cultivation in the bioreactor were 6.35 and 43.73%, respectively. The main fatty acids present in the yeast lipids were oleic acid (59.4%) and linoleic acid (8.6%). Analysis of the amino acid profile of the proteins showed the highest proportions were glutamic acid (13.7%) and aspartic acid (11%).

UV-C Seed Surface Sterilization and Fe, Zn, Mg, Cr Biofortification of Wheat Sprouts as an Effective Strategy of Bioelement Supplementation.

Metalloenzymes play an important role in the regulation of many biological functions. An effective way to prevent deficiencies of essential minerals in human diets is the biofortification of plant materials. The process of enriching crop sprouts under hydroponic conditions is the easiest and cheapest to conduct and control. In this study, the sprouts of the wheat (Triticum aestivum L.) varieties Arkadia and Tonacja underwent biofortification with Fe, Zn, Mg, and Cr solutions in hydroponic media at four concentrations (0, 50, 100, and 200 µg g-1) over four and seven days. Moreover, this study is the first to combine sprout biofortification with UV-C (λ = 254 nm) radiation treatment for seed surface sterilization. The results showed that UV-C radiation was effective in suppressing seed germination contamination by microorganisms. The seed germination energy was slightly affected by UV-C radiation but remained at a high level (79-95%). The influence of this non-chemical sterilization process on seeds was tested in an innovative manner using a scanning electron microscope (SEM) and EXAKT thin-section cutting. The applied sterilization process reduced neither the growth and development of sprouts nor nutrient bioassimilation. In general, wheat sprouts easily accumulate Fe, Zn, Mg, and Cr during the applied growth period. A very strong correlation between the ion concentration in the media and microelement assimilation in the plant tissues (R2 > 0.9) was detected. The results of the quantitative ion assays performed with atomic absorption spectrometry (AAS) using the flame atomization method were correlated with the morphological evaluation of sprouts in order to determine the optimum concentration of individual elements in the hydroponic solution. The best conditions were indicated for 7-day cultivation in 100 µg g-1 of solutions with Fe (218% and 322% better nutrient accumulation in comparison to the control condition) and Zn (19 and 29 times richer in zinc concentration compared to the sprouts without supplementation). The maximum plant product biofortification with magnesium did not exceed 40% in intensity compared to the control sample. The best-developed sprouts were grown in the solution with 50 µg g-1 of Cr. In contrast, the concentration of 200 µg g-1 was clearly toxic to the wheat sprouts.

Microbial astaxanthin: from bioprocessing to the market recognition.

The attractive biological properties and health benefits of natural astaxanthin (AXT), including its antioxidant and anti-carcinogenic properties, have garnered significant attention from academia and industry seeking natural alternatives to synthetic products. AXT, a red ketocarotenoid, is mainly produced by yeast, microalgae, wild or genetically engineered bacteria. Unfortunately, the large fraction of AXT available in the global market is still obtained using non-environmentally friendly petrochemical-based products. Due to the consumers concerns about synthetic AXT, the market of microbial-AXT is expected to grow exponentially in succeeding years. This review provides a detailed discussion of AXT's bioprocessing technologies and applications as a natural alternative to synthetic counterparts. Additionally, we present, for the first time, a very comprehensive segmentation of the global AXT market and suggest research directions to improve microbial production using sustainable and environmentally friendly practices. KEY POINTS: • Unlock the power of microorganisms for high value AXT production. • Discover the secrets to cost-effective microbial AXT processing. • Uncover the future opportunities in the AXT market.

Study of Water Freezing in Low-Fat Milky Ice Cream with Oat ß-Glucan and Its Influence on Quality Indicators.

The work is devoted to the study of the functional and technological properties of oat ß-glucan in low-fat milky ice cream (2% fat) in comparison with the stabilization system Cremodan® SI 320. ß-glucan (0.5%) has a greater effect on the cryoscopic temperature of ice cream mixes than Cremodan® SI 320 in the same amount (decrease by 0.166 °C vs. 0.078 °C), which inhibits the freezing process of free water in ice cream during technological processing in the temperature range from -5 to -10 °C. Microscopy of ice cream samples after freezing and hardening shows the ability of ß-glucan to form a greater number of energy bonds due to specific interaction with milk proteins. Analysis of the microstructure of ice cream samples during 28 d of storage confirms the ability of oat ß-glucan to suppress the growth of ice crystals more effectively than Cremodan® SI 320. Oat ß-glucan gives ice cream a rich creamy taste, increases overrun and resistance to melting, which brings this type of frozen dessert closer to a full-fat analogue (10% fat).

The Rheological Properties and Texture of Agar Gels with Canola Oil-Effect of Mixing Rate and Addition of Lecithin.

This study aimed to determine the effect of different mixing rates and the addition of lecithin on the rheological mechanical, and acoustic properties of agar gels with the addition of canola oil. The mixing rate of the agar-oil mixture was changed from 10,000 to 13,000 rpm. Additionally, agar gels with the addition of lecithin from 1 to 5% were prepared. The frequency sweep test was used (at 4 and 50 °C) within the linear viscoelastic region (LVR) in oscillatory measurement. The agar-oil mixture was cooled from 80 to 10 °C, enabling the obtainment of the gelling temperature. Texture profile analysis (TPA) and compression tests, as well as the acoustic emission method, were applied to analyse the texture of the gels. The syneresis and stability of gels during storage were also measure. The increase in mixing rate in the case of agar gel with canola oil causes an increase in the elastic component of materials as well hardness and gumminess. Also, samples prepared with the higher mixing rate have more uniform and stable structures, with small bubbles. The increase in the concentration of lecithin is ineffective due to the formation of gels with a weak matrix and low hardness, gumminess, and stability during storage.

Effect of selenium and methods of protein extraction on the proteomic profile of Saccharomyces yeast.

Selenium may influence the biosynthesis of individual proteins in the yeast cell cytosol. In this study, we used two-dimensional (2D) electrophoresis to identify proteins that are differentially expressed by the enrichment of selenium in Saccharomyces cerevisiae yeast cells. We chose eight protein fractions for further proteomic analysis. A detailed analysis was performed using the Ultraflextreme matrix-assisted laser desorption/ionisation time-of-flight/time-of-flight mass spectrometer, which enables fast and accurate measurement of the molecular weight of the analysed proteins. This study, for the first time, provides evidence that selenium-enriched yeast contains higher levels of mitochondria malate dehydrogenase, adenosine-5'-triphosphate (ATP)-dependent RNA helicase dbp3, and tryptophan dimethylallyltransferase, and alanyl-tRNA editing protein AlaX than yeast without the addition of selenium. It should be emphasised that the proteomic variability obtained reflects the high biological and complexity of yeast metabolism under control and selenium-enriched conditions and can be properly used in the future as a model for further research aimed at determining the expression of appropriate metabolic genes.

Temporal Trends in Oral Anticoagulant Prescription in Atrial Fibrillation Patients between 2004 and 2019.

BACKGROUND: In the recent years, antithrombotic prophylaxis in patients with atrial fibrillation (AF) has changed significantly. The main aim of this study is to assess the temporal trends of antithrombotic therapy and identify factors predisposing oral anticoagulant (OAC) use in stroke prevention in AF patients. METHODS: The present study is a retrospective, observational, single-center study, which includes consecutively hospitalized patients in the reference cardiology center from January 2004 to December 2019. RESULTS: A total of 9656 patients (43.7% female, mean age 71.2 years) with AF between 2004-2019 are included. Among the total study population, in most of the patients (81.1%), OAC therapy was used, antiplatelet (APT) therapy was prescribed for 13.5% patients, heparins for 2.1% patients and 3.3% of patients did not receive any stroke prevention. OAC prescription significantly increased from 61.6% in 2004 to 97.4% in 2019. The independent predictors of OAC prescription were: the period of hospitalization, non-paroxysmal AF, age, hypertension, diabetes mellitus, previous thromboembolism, hospitalization due to electrical cardioversion, ablation or AF without any procedures. CONCLUSIONS: In hospitalized patients with AF, during sixteen years of the study period, a significant increase in OAC use and a decrease in APT use were noted. Factors other than these included in the CHA2DS2-VASc score were independent predictors of OAC use.

Morphometric analysis of the lumbar vertebrae and intervertebral discs in relation to abdominal aorta: CT-based study.

PURPOSE: Although lumbar discectomy is the most common procedure in spine surgery, reports about anatomical relations between discs and prevertebral vessels are limited. Aim of this research was to investigate morphometric of the lumbar region and the relations between intervertebral discs (IVDs) and abdominal aorta. METHODS: 557 abdominal computed tomography scans were assessed. For each spinal column level from Th12/L1 down to L4/L5, we investigated: intervertebral disc's and vertebra's height, width, length, and distance from aorta or common iliac artery (CIA). Those arteries were also measured in two dimensions and classified based on location. RESULTS: 54.58% of patients were male. There was a significant difference in arterial-disc distances (ADDs) between genders at the levels: L1/L2 (1.32 ± 1.97 vs. 0.96 ± 1.78 mm; p = 0.0194), L2/L3 (1.97 ± 2.16 vs. 1.15 ± 2.01 mm; p < 0.0001), L3/L4 (2.54 ± 2.78 vs. 1.71 ± 2.61 mm; p = 0.0012), also for both CIAs (left CIA 3.64 ± 3.63 vs. 2.6 ± 3.06 mm; p = 0.0004 and right CIA: 7.96 ± 5.06 vs. 5.8 ± 4.57 mm; p < 0.001)-those ADDs were higher in men at all levels. The length and width of IVD increased alongside with disc level with the maximum at L4/L5. CONCLUSION: Bifurcations of the aorta in most cases occurred at the L4 level. Collected data suggest that at the highest lumbar levels, there is a greater possibility to cause injury of the aorta due to its close anatomical relationship with discs. Females have limited, in comparison to males, ADD at L1/L2, L2/L3, and L3/L4 levels what should be taken into consideration during preoperative planning of surgical intervention.

Current developments on the application of microbial carotenoids as an alternative to synthetic pigments.

Microbial carotenoids have attracted rising interest from several industries as a sustainable alternative to substitute the synthetic ones. Traditionally, carotenoids available in the market are obtained by the chemical route using nonrenewable sources (petrochemicals), revealing the negative impact on the environment and consumers. The most promising developments in the upstream and downstream processes of microbial carotenoids are reviewed in this work. The use of agro-based raw materials for bioproduction, and alternative solvents such as biosolvents, deep eutectic solvents, and ionic liquids for the recovery/polishing of microbial carotenoids were also reviewed. The principal advances in the field, regarding the biorefinery and circular economy concepts, were also discussed for a better understanding of the current developments. This review provides comprehensive overview of the hot topics in the field besides an exhaustive analysis of the main advantages/drawbacks and opportunities regarding the implementation of microbial carotenoids in the market.

Optically Active TiO2:Er Thin Films Deposited by Magnetron Sputtering.

Titanium dioxide photoanodes for hydrogen generation suffer from a profound mismatch between the optical absorption of TiO2 and the solar spectrum. To solve the problem of low solar-to-chemical efficiency, optically active materials are proposed. In this work, TiO2 thin films containing erbium were deposited by radio frequency RF magnetron sputtering under ultrahigh vacuum conditions UHV. Morphology, structural, optical and electronic properties were studied. TiO2:Er thin films are homogenous, with uniform distribution of Er ions and high transparency over the visible VIS range of the light spectrum. However, a profound 0.4 eV blue shift of the fundamental absorption edge with respect to undoped TiO2 was observed, which can be attributed either to the size effect due to amorphization of TiO2 host or to the onset of precipitation of Er2Ti2O7 nanocrystals. Near-infrared NIR to VIS up-conversion is demonstrated upon excitation at 980 nm, while strong green photoluminescence at 525 and 550 nm occurs upon photon absorption at 488 nm.

Use of Propionibacterium freudenreichii T82 Strain for Effective Biosynthesis of Propionic Acid and Trehalose in a Medium with Apple Pomace Extract and Potato Wastewater.

Propionic acid bacteria are the source of many metabolites, e.g., propionic acid and trehalose. Compared to microbiological synthesis, the production of these metabolites by petrochemical means or enzymatic conversion is more profitable. The components of microbiological media account for a large part of the costs associated with propionic fermentation, due to the high nutritional requirements of Propionibacterium. This problem can be overcome by formulating a medium based on the by-products of technological processes, which can act as nutritional sources and at the same time replace expensive laboratory preparations (e.g., peptone and yeast extract). The metabolic activity of P. freudenreichii was investigated in two different breeding environments: in a medium containing peptone, yeast extract, and biotin, and in a waste-based medium consisting of only apple pomace and potato wastewater. The highest production of propionic acid amounting to 14.54 g/L was obtained in the medium containing apple pomace and pure laboratory supplements with a yield of 0.44 g/g. Importantly, the acid production parameters in the waste medium reached almost the same level (12.71 g/L, 0.42 g/g) as the medium containing pure supplements. Acetic acid synthesis was more efficient in the waste medium; it was also characterized by a higher level of accumulated trehalose (59.8 mg/g d.s.). Thus, the obtained results show that P. freudenreichii bacteria exhibited relatively high metabolic activity in an environment with apple pomace used as a carbon source and potato wastewater used as a nitrogen source. This method of propioniate production could be cheaper and more sustainable than the chemical manner.

Characteristics of the Proteolytic Enzymes Produced by Lactic Acid Bacteria.

Over the past several decades, we have observed a very rapid development in the biotechnological use of lactic acid bacteria (LAB) in various branches of the food industry. All such areas of activity of these bacteria are very important and promise enormous economic and industrial successes. LAB are a numerous group of microorganisms that have the ability to ferment sugars into lactic acid and to produce proteolytic enzymes. LAB proteolytic enzymes play an important role in supplying cells with the nitrogen compounds necessary for their growth. Their nutritional requirements in this regard are very high. Lactic acid bacteria require many free amino acids to grow. The available amount of such compounds in the natural environment is usually small, hence the main function of these enzymes is the hydrolysis of proteins to components absorbed by bacterial cells. Enzymes are synthesized inside bacterial cells and are mostly secreted outside the cell. This type of proteinase remains linked to the cell wall structure by covalent bonds. Thanks to advances in enzymology, it is possible to obtain and design new enzymes and their preparations that can be widely used in various biotechnological processes. This article characterizes the proteolytic activity, describes LAB nitrogen metabolism and details the characteristics of the peptide transport system. Potential applications of proteolytic enzymes in many industries are also presented, including the food industry.

Carotenoids and Some Other Pigments from Fungi and Yeasts.

Carotenoids are an essential group of compounds that may be obtained by microbiological synthesis. They are instrumental in various areas of industry, medicine, agriculture, and ecology. The increase of carotenoids' demand at the global market is now essential. At the moment, the production of natural carotenoids is more expensive than obtaining their synthetic forms, but several new approaches/directions on how to decrease this difference were developed during the last decades. This review briefly describes the information accumulated until now about the beneficial effects of carotenoids on human health protection, their possible application in the treatments of various diseases, and their use in the food and feed industry. This review also describes some issues that are linked with biotechnological production of fungal and yeasts carotenoids, as well as new approaches/directions to make their biotechnological production more efficient.

Novel Primer Sets for Rapid Detection of Zymoseptoria tritici in Wheat.

Zymoseptoria tritici is a fungal pathogen causing losses in wheat yields. Here, we present new primer sets for species-specific identification of this microorganism in wheat leaf samples using conventional PCR. Primer sets were validated in silico using tools available in genetic databases. Furthermore, in vitro tests were also carried out on 190 common wheat samples with visual symptoms of Septoria tritici blotch (STB) collected in Poland in three growing seasons (2015, 2016, 2017). The designed primer sets showed full hybridization to the available genetic resources deposited in the NCBI GenBank database, and their high specificity and sensitivity were demonstrated on wheat leaf samples and selected fungal strains.

Metabolic Response of the Yeast Candida utilis During Enrichment in Selenium.

Selenium (Se) was found to inhibit the growth of the yeast Candida utilis ATCC 9950. Cells cultured in 30 mg selenite/L supplemented medium could bind 1368 µg Se/g of dry weight in their structures. Increased accumulation of trehalose and glycogen was observed, which indicated cell response to stress conditions. The activity of antioxidative enzymes (glutathione peroxidase, glutathione reductase, thioredoxin reductase, and glutathione S-transferase) was significantly higher than that of the control without Se addition. Most Se was bound to water-insoluble protein fraction; in addition, the yeast produced 20-30 nm Se nanoparticles (SeNPs). Part of Se was metabolized to selenomethionine (10%) and selenocysteine (20%). The HPLC-ESI-Orbitrap MS analysis showed the presence of five Se compounds combined with glutathione in the yeast. The obtained results form the basis for further research on the mechanisms of Se metabolism in yeast cells.

Comparison of simple and rapid cell wall disruption methods for improving lipid extraction from yeast cells.

The present study examined the effect of six disruption methods of the cell wall (acid hydrolysis, ultrasonication, osmotic shock, pasteurization, homogenization with zirconia balls, and freezing/defrosting) on the efficiency of lipid extraction from yeast cells and the composition of fatty acids. Acid hydrolysis and sonication led to a significant increase in lipid extraction from Cyberlindnera jadinii ATCC 9950 and Rhodotorula glutinis LOCKR13 yeast cells. The amount of lipids extracted in these conditions increased for C. jadinii from 12.46 (biomass not subjected to any pretreatment) to 20.37 and 19.53 g/100 gd.w. after the application of acid hydrolysis and sonication, respectively, and for R. glutinis strain from 13.95 to 21.20 and 17.22 g/100 gd.w., respectively, for the same methods. Initial sonication of biomass led to a significant reduction in the percentage of unsaturated fatty acids. The largest differences in fatty acid composition were found for the sample homogenized with zirconium balls. This process resulted in the degradation of both oleic acid and linolenic acid. The obtained results revealed that the method that significantly increases lipid extraction and does not change the composition of fatty acids is acid hydrolysis with hydrochloric acid. In addition, it is easy, cheap, does not require specialized equipment, and therefore can be implemented in any laboratory.